
Washington coverage · Written offers
Industrial Electrical Equipment Buyer for Bothell, WA Facilities
Pulling electrical gear out of a Bothell facility normally takes three vendors: an electrician to de-energize, a rigger to move the heavy sections, and a hauler to get it off site. Coordinating three trades around one outage window is where these projects go sideways. We collapse all three into one contract and pay you for the equipment on top of it.
Same-day written offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm PT. We never resell your contact information.
- Location
- Bothell, WA
- State
- Washington
- Utilities
- Puget Sound Energy, Seattle City
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
This city
Buying electrical equipment in Bothell
Our Washington routing runs along I-5, I-90, I-405 and Highway 2, which keeps trailer and crew cost predictable on Bothell projects. Utility territory matters too — Puget Sound Energy, Seattle City Light, Tacoma Power, Avista, Snohomish County PUD, Chelan and Grant County PUDs each have their own clearance, metering and disconnect expectations, and we have worked inside them. Washington splits at the Cascades and the two halves produce completely different equipment. West of the mountains the work is aerospace and marine: Boeing and its supplier base around Everett, Renton and Auburn, the Puget Sound shipyards and naval facilities, the container terminals at Seattle and Tacoma, and a dense stock of older industrial buildings along the Duwamish being converted or demolished. Hospital and university plants in Seattle replace essential-power systems on documented programs, which is the kind of paperwork that moves an offer up. East of the Cascades is where the heavy gear is: aluminum smelting legacy at Wenatchee and Goldendale, food processing across the Columbia Basin, the Hanford site and its contractors, and the hydro-fed data center corridor at Quincy and Wenatchee that runs on cheap power and upgrades on a fast cycle. The public utility districts matter here in a way they do not in most states — Chelan, Grant, Douglas and Snohomish own their own distribution, so clearance procedures and surplus disposal practices vary by district and we plan for that rather than being surprised by it.
Paperwork travels with the job: a certificate of insurance naming your entity, a W-9, a signed purchase agreement listing every asset and its price, oil test and disposal manifests where transformers are in scope, and weight tickets or a bill of lading for what leaves the Bothell site. Maintenance, EHS and accounting each get the document they need.
Equipment
What we buy in Bothell
Fourteen categories. We buy every one of them at Bothell sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVAPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopeValuation
What drives the number
Copper is the floor under most of this equipment, and it is a floor that moves. Bus bar, windings and feeder cable set a minimum value we can always pay on a Bothell lot; resale demand for the specific make and model is what lifts the offer above it. Obsolete breakers and discontinued panelboard interiors are the clearest example — unglamorous parts that plants cannot buy new anywhere.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Bothell site |
| Freight | I-5, I-90, I-405 and Highway 2 |
Safety
Safety and documentation
Safety is scope, not a brochure page. Crews working in Bothell operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Nearby
Nearby cities and buyer desks
Bothell routes with these nearby Washington sites:
Common questions
Bothell questions
What is the smallest job you will take in Bothell?
A single transformer, one switchgear section, a pallet of breakers or a few boxes of breakers is worth a call. Because we route crews across Washington continuously, small Bothell pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Bothell site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Bothell is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Bothell room is still partly live we phase the work.
How do you handle transformer oil in Bothell?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Bothell and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Bothell dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
What if the equipment is old or has no test records?
We still quote it. Records raise the number — a NETA test report on a breaker or a transformer is the single document that most improves what we can pay — but their absence disqualifies nothing. We price Bothell equipment on what our technicians and the replacement market say it is worth.
Electrical equipment in Bothell?
Photos of the nameplates are enough to start. Written offer the same business day.