
Serving Kennewick and the surrounding metro
Kennewick, WA: Industrial Electrical Equipment Bought and Removed
Most Kennewick plant engineers call us at one of two moments: the week a capital upgrade is approved, or the week a demolition contractor asks who is taking the electrical scope. The question is the same either way — what is it worth, and who gets it out of the building? One written offer answers both, because we are the buyer, the removal contractor and the hauler.
Same-day written offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm PT. We never resell your contact information.
- Location
- Kennewick, WA
- State
- Washington
- Utilities
- Puget Sound Energy, Seattle City
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
This city
Buying electrical equipment in Kennewick
Washington industry gives Kennewick projects a real secondary market close by. Washington splits at the Cascades and the two halves produce completely different equipment. West of the mountains the work is aerospace and marine: Boeing and its supplier base around Everett, Renton and Auburn, the Puget Sound shipyards and naval facilities, the container terminals at Seattle and Tacoma, and a dense stock of older industrial buildings along the Duwamish being converted or demolished. Hospital and university plants in Seattle replace essential-power systems on documented programs, which is the kind of paperwork that moves an offer up. East of the Cascades is where the heavy gear is: aluminum smelting legacy at Wenatchee and Goldendale, food processing across the Columbia Basin, the Hanford site and its contractors, and the hydro-fed data center corridor at Quincy and Wenatchee that runs on cheap power and upgrades on a fast cycle. The public utility districts matter here in a way they do not in most states — Chelan, Grant, Douglas and Snohomish own their own distribution, so clearance procedures and surplus disposal practices vary by district and we plan for that rather than being surprised by it. Equipment that leaves your site frequently goes back into service within a few hundred miles of where we picked it up, and that is what lets us pay above metal value.
Once an offer is accepted in Kennewick we schedule around your outage window, not ours. Nights, weekends and phased removals are normal. Crews arrive with their own rigging, skates, lifts, torches and oil-handling equipment, pull the gear, protect your floors and leave the electrical room clear for the next trade.
Equipment
What we buy in Kennewick
Fourteen categories. We buy every one of them at Kennewick sites.
Electrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVAPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopeValuation
What drives the number
Transformer oil is the item sellers in Kennewick worry about most, and fairly so. We test it, drain it, manifest it through licensed handlers and hand you the documentation. PCB-suspect units are handled under their own waste profile. The cost of that handling is already inside the offer, so nothing surprises you after the fact.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Kennewick site |
| Freight | I-5, I-90, I-405 and Highway 2 |
Safety
Safety and documentation
Safety is scope, not a brochure page. Crews working in Kennewick operate to NFPA 70E for arc-flash boundaries and PPE, follow OSHA 1910.147 lockout and tagout with our own locks and written procedures, and hold a daily job safety analysis before the first bolt turns. We do not energize, test or operate your equipment — isolation is verified with your electrician before we touch anything.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Nearby
Nearby cities and buyer desks
More Washington cities on the same routing as Kennewick:
Common questions
Kennewick questions
Do you actually buy electrical equipment in Kennewick, or just broker it?
We buy it. West Electrical Buyers is the purchaser of record — we fund the purchase, send our own crews to Kennewick to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Kennewick?
A single transformer, one switchgear section, a pallet of breakers or a few boxes of breakers is worth a call. Because we route crews across Washington continuously, small Kennewick pickups usually get added to an existing run rather than priced as a dedicated trip.
How fast can you get to a Kennewick site?
Written offers go out the same business day in nearly every case. After acceptance, typical mobilization to Kennewick is a few business days for a straightforward removal and one to two weeks for a full plant scope that needs phasing, rigging plans or utility coordination.
Do we have to disconnect the equipment before you arrive?
No. We handle removal. Your electrician or the utility performs the final isolation and we verify it; from there our crews lock out, cut and cap cable at the gland, unbolt the sections, skate them out and load them. If the Kennewick room is still partly live we phase the work.
How do you handle transformer oil in Kennewick?
Oil is tested, drained and manifested through licensed handlers, and you receive the documentation with your paperwork. PCB-suspect units go under a separate waste profile. Nothing is left on your pad in Kennewick and nothing gets dumped — the handling cost is already in the offer.
When do we get paid?
Before the equipment leaves your Kennewick dock. Wire, company check or cashier's check, whichever your accounting group prefers. On large phased projects we pay per load as it ships rather than holding everything until the end.
Electrical equipment in Kennewick?
Photos of the nameplates are enough to start. Written offer the same business day.